师生互动与大学英语教学

依据笔者的教学实践和心得体会,探讨了英语教学本质,分析了师生互动对提高大学英语教学水平的重要意义,指出了实践师生互动过程中应注意的问题。     

管道瞬态激振响应管长的计算

在水击压力波沿管道传播的过程中，遇到内部流场边界时，就会对管道产生激振响应，从而引起管道的振动。针对管道的激振响应，分别从水击波的简化模型和考虑管道和流体相互作用的固液耦合模型，推导了管道瞬态激振响应中的激振部件间隔管长计算公式，分析比较了简化模型和耦合模型的不同，并且提出一些防止共振的方法。     

A model for geographically distributed combat interactions of swarming naval and air forces

This article describes the Distributed Interaction Campaign Model (DICM), an exploratory campaign analysis tool and asset allocation decision‐aid for managing geographically distributed and swarming naval and air forces. The model is capable of fast operation, while accounting for uncertainty in an opponent's plan. It is intended for use by commanders and analysts who have limited time for model runs, or a finite budget. The model is purpose‐built for the Pentagon's Office of Net Assessment, and supports analysis of the following questions: What happens when swarms of geographically distributed naval and air forces engage each other and what are the key elements of the opponents’ force to attack? Are there changes to force structure that make a force more effective, and what impacts will disruptions in enemy command and control and wide‐area surveillance have? Which insights are to be gained by fast exploratory mathematical/computational campaign analysis to augment and replace expensive and time‐consuming simulations? An illustrative example of model use is described in a simple test scenario. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 562–576, 2016     

管道气液固三相流的耦合瞬变模型研究

在管输水力瞬变过程中,管道与流体之间存在耦合互动作用,需要用流固耦合模型来进行描述.针对工程中的多相流动问题,以最常见的气液固三相流为对象,建立了考虑流固耦合效应的水力瞬变模型.通过改变流体中固相或气相的体积分数,模型可适用于气液、固液两相流以及纯液体单相流的耦合水力瞬变,是单相流耦合瞬变模型向多相流耦合瞬变模型的拓展...     

On parallel machine replacement problems with general replacement cost functions and stochastic deterioration

The parallel machine replacement problem consists of finding a minimum cost replacement policy for a finite population of economically interdependent machines. In this paper, we formulate a stochastic version of the problem and analyze the structure of optimal policies under general classes of replacement cost functions. We prove that for problems with arbitrary cost functions, there can be optimal policies where a machine is replaced only if all machines in worse states are replaced (Worse Cluster Replacement Rule). We then show that, for problems with replacement cost functions exhibiting nonincreasing marginal costs, there are optimal policies such that, in any stage, machines in the same state are either all kept or all replaced (No‐Splitting Rule). We also present an example that shows that economies of scale in replacement costs do not guarantee optimal policies that satisfy the No‐Splitting Rule. These results lead to the fundamental insight that replacement decisions are driven by marginal costs, and not by economies of scale as suggested in the literature. Finally, we describe how the optimal policy structure, i.e., the No‐Splitting and Worse Cluster Replacement Rules, can be used to reduce the computational effort required to obtain optimal replacement policies. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

论教育传播学视角下的课堂互动

本文针对当前课堂教学互动中存在的问题,从教育传播学的理论视角下对其进行了分析。笔者认为,可以将课堂互动理解为特殊的教学媒体,特定的教学过程以及特别的传播环境。以期实现对课堂互动的重定位,构建一个高效、民主、和谐的教学与学习环境,实现教与学的最优化。     

有限水深Kelvin源格林函数的传播特性及其应用

为探究有限水深环境下自由面兴波在远场的传播特性,应用线性水动力学的基本理论,从有限水深Kelvin源格林函数的积分表达式中提取相函数,采用同相分析法求得亚临界和超临界速度区下远场传播波系的等相线。结果表明,水深傅汝德数Fh1时远场传播波包括横波和散波两个波系,F_h1时远场波系仅由散波构成,点源兴波的影响范围可由Kelvin角的大小确定,当F_h趋近于1时Kelvin角迅速增大至90°。依据船型要素、两船相对位置和池壁几何参数,并计及船模的定常兴波经池壁反射作用后对自身和另一船模的干扰,提出了有限水深条件下并行航行两船模池壁效应的判别方法,并结合实例检查分析了某试验工况下的池壁效应。     

有限质量降落伞充气动力学数值模拟

为研究空投任务中降落伞有限质量充气过程的动力学行为,基于罚函数耦合方法和网格自适应技术分析了降落伞柔性结构与周围不可压缩流场的流固耦合特性。数值模拟开伞过程伞衣三维外形变化,获得降落伞系统下落速度、阻力面积等参数;对比分析初始投放速度对降落伞开伞时间、伞衣阻力面积的影响;通过试验数据对比分析开伞力变化。计算结果表明,该方法可以有效模拟降落伞系统有限质量充气过程的动力学特性,仿真结果与试验结果相符。     

装配式管线水力瞬变的非线性流固耦合模型

装配式管线是一种重要的油料保障装备,用于地面铺设,属于典型的薄壁弱约束管线系统。根据装配式管线的特点,应用管道弹性变形理论,推导了水力瞬变状态下装配式管线的非线性流固耦合5-方程模型。该模型充分考虑了管道与流体之间的耦合互动效应,耦合形式包含了泊松耦合、摩擦耦合、结合部耦合,以及管线系统的轴向、横向和径向振动耦合,并计及了管道结构阻尼的影响。针对装配式管线的特殊连接约束方式,提出了一种带有扭转弹簧的铰支型约束边界,可通过确定扭转弹簧的弹性系数来建立管线两端的约束边界方程。     

降落伞充气过程中“瓶颈”效应

以大型伞或特大型伞为研究对象,采用任意拉格朗日-欧拉(ALE)流固耦合方法模拟某载人飞船主伞(环帆伞)在无限质量情况下的充气展开过程。计算获得了充气过程中,伞衣外形和流场之间的动态关系,数值模拟出非对称充气、伞顶甩打等不良充气现象,提出了充气过程存在"瓶颈"效应,通过大量的实物试验验证该效应的存在。通过结果分析发现"瓶颈"效应实质是由于伞衣面积大,伞衣结构复杂或开伞速度过大导致气团进入伞体受阻造成的,但其产生的具体必要条件尚有待进一步研究。结论对了解降落伞工作机理,防止开伞失效有重要意义。